Přídavná svítící mřížka na 80mm ventilátory. Pro všechny příznivce svítících počítačů. Function 1: Connect to motherboard It provides two kinds of lighting statuses, showing as the following pictures 1. Find out the position of “Power LED” & “HDD LED “ on the M/B. 2. Remove the original “Power LED” & “HDD LED” connectors from the M/B. 3. Plug the CoolMod “Power LED” connector (3-pin) into the “PLED” position of the M/B. 4. Plug the CoolMod “HDD LED” connector (2-pin) into the “HDD LED” position... Celý popis
Koupit za 99 Kč- Od nejoblíbenějších
- Od nejlevnějších
- Od nejdražších
Popis
Přídavná svítící mřížka na 80mm ventilátory. Pro všechny příznivce svítících počítačů.
Function 1: Connect to motherboard
It provides two kinds of lighting statuses, showing as the following pictures
1. Find out the position of “Power LED” & “HDD LED “ on the M/B.
2. Remove the original “Power LED” & “HDD LED” connectors from the M/B.
3. Plug the CoolMod “Power LED” connector (3-pin) into the “PLED” position of the M/B.
4. Plug the CoolMod “HDD LED” connector (2-pin) into the “HDD LED” position of the M/B.
5. The CoolMod LED installation is finished.
Function 2: Connect to power supply by attached electric wire
In this status, the blue & red LED keep lighting. Showing as the following picture
HDD Access:
Blue + Red LED Light
Connect the CoolMod “Power LED” connector (Dupond-3pin) to the attached electric wire.
Connect the CoolMod “HDD LED” connector (Dupond-2pin) to the attached
- Bluetooth
-
Infra/IrDA
-
Čtečky flash karet
-
Grafické karty (GPU)
-
Chladiče
-
Mechaniky FDD / CD / DVD / BD
-
Modemy
-
Paměti (RAM)
-
Paměťové karty (SD/CF/MMC/XD)
-
PC skříně (CASE)
-
Pevné disky (HDD)
-
Procesory (CPU)
-
Řadiče
-
TV a video karty
-
USB Flash disky (USB klíčenky)
-
USB HUBY
-
FireWire HUBY
-
Základní desky (MB)
-
Zdroje (do PC skříní)
-
Zvukové karty
Function 1: Connect to motherboard
It provides two kinds of lighting statuses, showing as the following pictures
1. Find out the position of “Power LED” & “HDD LED “ on the M/B.
2. Remove the original “Power LED” & “HDD LED” connectors from the M/B.
3. Plug the CoolMod “Power LED” connector (3-pin) into the “PLED” position of the M/B.
4. Plug the CoolMod “HDD LED” connector (2-pin) into the “HDD LED” position of the M/B.
5. The CoolMod LED installation is finished.
Function 2: Connect to power supply by attached electric wire
In this status, the blue & red LED keep lighting. Showing as the following picture
HDD Access:
Blue + Red LED Light
Connect the CoolMod “Power LED” connector (Dupond-3pin) to the attached electric wire.
Connect the CoolMod “HDD LED” connector (Dupond-2pin) to the attached
- Bluetooth
-
Infra/IrDA
-
Čtečky flash karet
-
Grafické karty (GPU)
-
Chladiče
-
Mechaniky FDD / CD / DVD / BD
-
Modemy
-
Paměti (RAM)
-
Paměťové karty (SD/CF/MMC/XD)
-
PC skříně (CASE)
-
Pevné disky (HDD)
-
Procesory (CPU)
-
Řadiče
-
TV a video karty
-
USB Flash disky (USB klíčenky)
-
USB HUBY
-
FireWire HUBY
-
Základní desky (MB)
-
Zdroje (do PC skříní)
-
Zvukové karty
Parametry
Výrobce | Thermaltake |
Typ příslušenství | mřížky |